-
1U-2U HP Sliding Rail Kits for Gen 10 Plus(0)As low as £155.99 £129.99Built to Fit Gen 10 Plus DL385,
DL325 1075 and DL325 1200 -
Dell PowerEdge R520, R530 Rack Rails(0)As low as £155.99 £129.99Alternative to Dell R510 rail kit
Fixed Rails -
Dell PowerEdge R810, R815 & Precision R5500, R7610 Rack Rails(0)As low as £155.99 £129.99Designed for Dell R810, R815
Fixed Rails -
Universal Rack Rails(0)As low as £119.99 £99.99Universal Rail Kit
Fixed Rail (1U, 2U, 3U) -
Universal Shallow Rack Rails(0)As low as £119.99 £99.99Universal Shallow
Fixed Rail (1U, 2U, 3U) -
Deep Rackmount Rails(0)As low as £119.99 £99.99Universal Deep
Fixed Rail (1U, 2U, 3U) -
2 Post Rack Rails(0)As low as £143.99 £119.99Universal 2Post
Fixed Rail (1U, 2U, 3U) -
Tool-less Rack Rails(0)As low as £119.99 £99.99Universal Tool-less
Fixed Rail (1U, 2U, 3U) -
1U Cobra 79 Rail for DellSKU: 122-2579(0)£96.00 £80.00Installs in 2-Post and 4-Post
Sliding rail kit to replace ReadyRails -
2U Cobra 80 Rail for DellSKU: 122-2580(0)£108.00 £90.002U Rails Dell PowerEdge R540, R720, R740
Sliding Alternative to Dell ReadyRails -
2U Raven 47 Rail for HPSKU: 122-2447(0)£72.00 £60.00HP DL380 Gen 8, Gen 9 & Gen 10 HP DL560 Gen 8 & Gen 10 Slide Rails -
1U Raven 13 Rail for HPSKU: 122-2413(0)£96.00 £80.00HP DL320 & DL360 Gen 8, Gen 10 Slide Rails -
1U Sliding Shelf Rail Kit for Dell Precision T3600, T5600SKU: 112-2167(0)£120.00 £100.00Alternative Sliding Shelf/Rails
for Dell T3600/5600 -
2U Sliding Rail Kit for Dell Precision T7600SKU: 120-3662(0)£132.00 £110.00Rackmount Dell T7600
Designed for 4 Post Rack -
Dell PowerEdge R710 Rack RailsSKU: 2UBRK-R7(0)£102.00 £85.00Dell R710 Alternate Rail Kit
Fixed Rails for 4Post and 2Post server racks -
Dell PowerEdge R410, R310, R210, NX300 Fixed RailsSKU: 1UBRK-R4(0)£102.00 £85.00Dell R410, R310,
R210, NX300 Fixed Rails -
Dell PowerEdge R710 Slide Rails(0)As low as £209.99 £174.99Alternative to Dell R710 slide rails
Fits any 4Post rack -
Dell PowerEdge R610 Slide Rails(0)As low as £209.99 £174.99Alternative to Dell R610 rail kit
Fits any 4Post, 2Post racks -
Dell PowerEdge R300, 1950 Rack RailsSKU: 1UBRK-R300(0)£102.00 £85.00Dell R300, 1950
1950 III Fixed Rails -
Dell FX2 Quick Dry Slide Rack RailsSKU: 122-5054(0)£120.00 £100.00Dell FX2 Dry Slide Rails
Dry slide rail kit -
Dell 2950, 2970, R5400 Slide RailsSKU: 2URAIL-2950(0)£87.47 £72.89Designed for Dell R2950, R2970, and R5400
Adjustable mounting depth slide rail kit -
Dell 2950, 2970 Quick RailsSKU: QUICKRAIL-2950(0)£138.00 £115.00Designed for Dell R2950, R2970
Tool-less installation in 4Post rack -
Lenovo/IBM System M5 Slide RailsSKU: 122-4818(0)£84.00 £70.00Alternative to Lenovo/IBM rail kit
Fits any 4Post or 2Post rack
In case you were wondering
+ What U height should my rail be?
If you are buying rails which are designed for a specific server, they are already sized to be the optimal U height for that piece of equipment.
Universal rails, on the other hand, will be able to hold your server as long as it is under the weight capacity. For instance a 1U universal rail can hold a 2U server as long as that server is less than 45 lbs. Best practice is to purchase a rail that takes up the same number of rack units as your server.
+ What’s the difference between mounting depth and equipment depth?
Mounting depth refers to what sized rack the rail will fit inside. For example, a Cobra 90 Rail with a mounting depth range of 20” - 30” will fit inside of racks with 20” - 30” of space between the connection points on the uprights.
Equipment depth, on the other hand, describes what length equipment must be to fit on the rail. A Universal Rail can mount equipment up to 35” deep. This is mostly relevant to rails that are compatible with multiple servers.
+ What are the pros and cons of Universal Rails?
You can mount any server on Universal Rails and re-use them for new equipment in the future without worrying about compatibility.
Unfortunately, in order to make rails cross compatible the design needs to ignore shoulder screws which are typically what keep servers locked in place. When using a Universal Rail, you will need to take advantage of your server’s thumb screws for extra security.
+ What are Cobra Rails?
Cobra Rails is our server rail product line that is compatible with all 11th gen and newer Dell servers. Between our four Cobra rail options, you should find one that mounts your Dell server with an OEM quality fit.
+ What’s the easiest way to install cage nuts?
Before installing your server rails, we recommend picking up our Cage Nut Tool. Cage nuts are able to be installed without tools, but after putting in more than a few, it can be uncomfortable and potentially hurt your hand.
+ Is all of the hardware I need included?
Most of our rails work with square, round and threaded hole racks. Because of this, we include all the hardware that is needed to mount the rails in any type of rack. All you’ll need is a phillips head screwdriver, unless you’re using our tool-less rails in which case you don’t need any tools at all.
About RackSolutions
At RackSolutions, we want our passion for creative engineering and build quality to come across every time you work with our products. For 20 years, we’ve been building data center infrastructure for some of the largest tech companies in the world and bringing those products straight to consumers.
Contact us for questions or custom mounting needs.